REFERENCE Vivo y53 pattern lock done by cm2 qlm

[bryan atega]

Card found : D272A27D , v0136
Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.15


Operation : Reset UserLocks [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...

Device not found!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Reset UserLocks [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 425 [MSM8917]
ID_BLOCK_S : B62C3435
ID_BLOCK_I : 000560E1
ID_BLOCK_L : 1E39E2016C13207E3AF27E9C78A71BA8
ID_BLOCK_L : E5AA20D72DD51CA52CB95FE8474D603A
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8917 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HAG4a2
Boot Ok!


Error : FS verification fail! Encrypted or damaged!

Reconnect Power/Cable!

Operation : Read PatternLock [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 425 [MSM8917]
ID_BLOCK_S : B62C3435
ID_BLOCK_I : 000560E1
ID_BLOCK_L : 1E39E2016C13207E3AF27E9C78A71BA8
ID_BLOCK_L : E5AA20D72DD51CA52CB95FE8474D603A
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8917 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HAG4a2
Boot Ok!


Error : FS verification fail! Encrypted or damaged!

Reconnect Power/Cable!

Operation : Reset Settings [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 425 [MSM8917]
ID_BLOCK_S : B62C3435
ID_BLOCK_I : 000560E1
ID_BLOCK_L : 1E39E2016C13207E3AF27E9C78A71BA8
ID_BLOCK_L : E5AA20D72DD51CA52CB95FE8474D603A
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8917 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HAG4a2
Boot Ok!

Format USER ...
Format CACHE ...
Format Ok!
Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:19

Reconnect Power/Cable!

 

[raixie]

congrats boss nadali mo rin....anung dahilan nung mga error sa log boss? ayus lang ba kapag ganun?

 

[bryan atega]

ok lang un boss...hndi lang xa madetec agad kaya nag eeror.

 

[ahakuk]

EDL power