What's new
By:
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

vvio v3 frp remove and backup na rin

charlie0816

charlie0816

Registered
Joined
Jun 12, 2014
Messages
384
Reaction score
10
Points
31
sahre mga sir vivo v3 frp remove by cm2 qualcom

reference lng...
Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.13


Operation : Identify [ v1.13 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...

Device not found!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Read Flash [ v1.13 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 0905B7C6
ID_BLOCK_I : 0090B0E1
ID_BLOCK_L : 6FAE9570FB62B3EFAB8DEF0FEBD66A39
ID_BLOCK_L : DE8319EC04EEC57E479070319E764B11
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8936 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!


Brand : vivo
ProdName : V3
ProdModel : vivo V3
Device : msm8916_32
AndroidVer: 5.1.1
Manufact. : vivo
QLMxCPU : MSM8916

DevInfo : MSM8916__vivo__vivo__ANDR_v5.1.1__vivo_V3__msm8916_32__V3

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : ddr.bin
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : bootbak.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : oem.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8936 / eMMC
Firmware Size : 2499 MiB

Done!
Elapsed: 00:06:11

Reconnect Power/Cable!

Operation : EDL Security Operation [ v1.13 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 0905B7C6
ID_BLOCK_I : 0090B0E1
ID_BLOCK_L : 6FAE9570FB62B3EFAB8DEF0FEBD66A39
ID_BLOCK_L : DE8319EC04EEC57E479070319E764B11
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8936 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Backup Security Partitions
Backup : FSG
Backup : MODEMST1
Backup : MODEMST2
Backup saved to : C:\InfinityBox\CM2QLM\Backup\MSM8936_[0090B0E1]_0905B7C6_SEC\

Done!
Elapsed: 00:00:16

Reconnect Power/Cable!

Operation : Reset Settings [ v1.13 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 0905B7C6
ID_BLOCK_I : 0090B0E1
ID_BLOCK_L : 6FAE9570FB62B3EFAB8DEF0FEBD66A39
ID_BLOCK_L : DE8319EC04EEC57E479070319E764B11
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8936 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Format USER ...
Format CACHE ...
Format Ok!
Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:20

Reconnect Power/Cable!

sabay backup na rin...

firmware uploading mga sir...
 
charlie0816 said:
sahre mga sir vivo v3 frp remove by cm2 qualcom

reference lng...
Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.13


Operation : Identify [ v1.13 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...

Device not found!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Read Flash [ v1.13 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 0905B7C6
ID_BLOCK_I : 0090B0E1
ID_BLOCK_L : 6FAE9570FB62B3EFAB8DEF0FEBD66A39
ID_BLOCK_L : DE8319EC04EEC57E479070319E764B11
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8936 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!


Brand : vivo
ProdName : V3
ProdModel : vivo V3
Device : msm8916_32
AndroidVer: 5.1.1
Manufact. : vivo
QLMxCPU : MSM8916

DevInfo : MSM8916__vivo__vivo__ANDR_v5.1.1__vivo_V3__msm8916_32__V3

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : ddr.bin
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : bootbak.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : oem.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8936 / eMMC
Firmware Size : 2499 MiB

Done!
Elapsed: 00:06:11

Reconnect Power/Cable!

Operation : EDL Security Operation [ v1.13 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 0905B7C6
ID_BLOCK_I : 0090B0E1
ID_BLOCK_L : 6FAE9570FB62B3EFAB8DEF0FEBD66A39
ID_BLOCK_L : DE8319EC04EEC57E479070319E764B11
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8936 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Backup Security Partitions
Backup : FSG
Backup : MODEMST1
Backup : MODEMST2
Backup saved to : C:\InfinityBox\CM2QLM\Backup\MSM8936_[0090B0E1]_0905B7C6_SEC\

Done!
Elapsed: 00:00:16

Reconnect Power/Cable!

Operation : Reset Settings [ v1.13 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 0905B7C6
ID_BLOCK_I : 0090B0E1
ID_BLOCK_L : 6FAE9570FB62B3EFAB8DEF0FEBD66A39
ID_BLOCK_L : DE8319EC04EEC57E479070319E764B11
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8936 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Format USER ...
Format CACHE ...
Format Ok!
Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:20

Reconnect Power/Cable!

sabay backup na rin...

firmware uploading mga sir...
Click to expand...

sir saan na po yung backup file nito sir , salamat po
 
You must log in or register to reply here.
Back
Top