REFERENCE Walton Primo GH7i Flash File Ver-2 Dead Recovery Fix Firmware

[jeff3]

Walton Primo GH7i Flash File Ver-2 Dead Recovery Fix Firmware

Walton GH7i Ver-2 The Following issues Will be Solved By this Firmware.

• Fix your Walton GH7i Ver-2 bootloop & restart problem
• Auto fastboot mode and recovery
• Unroot or fix bugs your phone
• Remove Pin/Pattern/privacy/password & frp lock
• Upgrade and downgrade your phone
• Walton GH7i Ver-2 Fix stuck on logo
• Removes any virus, spyware or Adware unwanted apps
• Fix lcd/display black & white after flash
• Sp tools error while try to flash with other firmware
• Walton GH7i Ver-2 Unbrick Dead After Flash

Firmware Details:

Device Brand:	Walton
Model:	GH7i
OS Version:	Android 8.1 (Oreo)
Processor:	MT6580 Mediatek Chipset
Driver:	MTK USB Driver
Tool Support:	Smart Phone (Sp Flash Tool)
File Size:	700MB
File Type:	Official
Archive Format:	7zip
Uploaded Link:	Google Drive

Download Firmware
GH7i Ver 2 Care Firmware
Download Here
Before flashing this rom make sure to follow the pre-requisite and install the necessary have you drivers and tools on your PC And laptop to ready to flashing your Walton GH7i Ver-2
Pre-Requirements:

• This Firmware will only work on Walton GH7i Ver-2. Don’t try it on others model.
• A PC And Laptop
• A Good USB Data Cable
• should have your device charge the battery up to 60%
• Walton GH7i Ver-2 Rom And Flashtool/USB Drivers

After downloading the Walton GH7i Ver-2 Flash file Tools Driver From above link .you will need to use Smartphone Sp flash Tool to flash the Stock firmware. Here is a detailed guide mentioned below which you can follow completely Step by Step
Instructions to Flashing Stock ROM on Walton GH7i Ver-2

Step 1. Download Firmware ROM Included Winrar/7ip Flash Tool & Usb Driver
Step 2. Extract The ROM Or Driver And Tool On Your PC
Step 3. After Extracting You Will See Flash Tool, Driver And Instruction Manual
Step 4. Install the USB Drivers Skip If Drivers Are Already Installed
Step 5. Open The Sp Flash Tool And load The Scatter File From The Firmware Folder
Step 6. Click Download Button In The SP Flash Tool To Start Flashing
Step 7. Connect Your Smartphone To The Computer Using By Good USB Cable
Step 8. Green Rink Ok Massage Will Appear Of Successful Flashing Complete And You Done