- Joined
- Oct 30, 2014
- Messages
- 1,127
- Reaction score
- 19
- Points
- 181
META-MODE on SP TOOLS
CLICK TO HIDE CONTENT
Meta-Mode is very useful if device fails to get detected by PC under normal Conditions.....To make device fall to Meta-Mode,just do these :
1) Start SP Tool on PC..
2) Now run SP Tool with "Firmware Upgrade/Download"
3) Switch OFF Phone..
4) Remove Battery..
5) Connect mobile to PC while holding Volume + button [WITHOUT BATTERY]..
6) Flashing will be started
7) Hold the button till flashing completes...
8) After 100% Flash,Release Button..
9) Insert Battery..
10) Start Device..
11) HIT THANKS PLEASE BECAUSE IT WONT COST ANY ^#(^
credit goes to creator...
CLICK TO HIDE CONTENT
Meta-Mode is very useful if device fails to get detected by PC under normal Conditions.....To make device fall to Meta-Mode,just do these :
1) Start SP Tool on PC..
2) Now run SP Tool with "Firmware Upgrade/Download"
3) Switch OFF Phone..
4) Remove Battery..
5) Connect mobile to PC while holding Volume + button [WITHOUT BATTERY]..
6) Flashing will be started
7) Hold the button till flashing completes...
8) After 100% Flash,Release Button..
9) Insert Battery..
10) Start Device..
11) HIT THANKS PLEASE BECAUSE IT WONT COST ANY ^#(^
credit goes to creator...