xperia x10 unlock Done [2 MINS ONLY]

[FullFlash2014]

POWER ON INSTALL DRIVER
LAHAT NG DRIVER
RESTART PC
THEN
START UNLOCKING

Unlock procedure started, waiting for phone.
Power off phone, keep BACK button and insert usb cable.
Keep holding back key untill next prompt.
Connecting to the server
Please wait....
Send S1 Loader
Loader is sent, please wait...
Read device info.
CXC : 1226-2250
IMEI : 35941903936073
EROM AID : 0001
LOADER AID : 0001
AID TAMP STATE : NOT_TAMPERED
SE X10 GROUP
- HOLD THE BACK KEY
IMEI : 35941903936073
- SE UNLOCK STARTED (X10 group).
- WAITING USER ACTION
- WAITING PHONE
Version : 2.1-update1 OK.
- PHONE FOUND
- ROOT ACCESS OK
Changes made...
Verifing new data, cant take up to 1min, do not tuch phone!
- STATUS: - UNLOCKED!

How to connect and unlock TP phones(without battery).
1.Remove battery from phone.
2.Check phone version(located under battery, example 11W30)
3.Prepare TP connection, some phones
4.If drivers already installed skip this step.
4.1.Open device manager.
4.2. Without battery connect TP to phone.
4.3.Insert USB cable, wait untill device detected, dissconect cable.
4.4.Install drivers if need(In device manager must apair comport).
4.5.If in device manager not displayed comport, check drivers again, install correct driver.
4.6.Remove usb cable.
5.Select Phone from Model combobox.
6.Press Unlock.
7.Perform software steps.
8.All done.

How to connect nonTP phones(with battery).
1.Power on phone, check if battery is charged.
2.Enable ADB in phone.
3.If drivers installed skip this step.
3.1 Install ADB drivers.
3.2.Remove USB cable,power off phone.
3.3.Press "back button" and insert usb cable.
3.4.Install Drivers.
3.5.Remove USB cable.
4.Select corect model from combobox.
5.If phone is X10, X10i or X10a, and android version is 2.3 check "2.3 android version".
6.Press unlock.
7.Hold "back key" and insert usb cable.
8.Perform software steps.
9.All done.

P.S. For X10, X10i, X10a, some times phone can stuck when temp root is performed.
If this happen, remove and insert back USB cable.
Phone must have stock firmware and not rooted, please check this before start unlock.
If unlock is failed, and phone lost network, repeat unlock procedure again.
For nonTP phones wait untill phone power ON fully itself after unlock finished(very important).

 

[TOTO27]

thanks sir for sharing that idea & tips