- Joined
- Oct 17, 2014
- Messages
- 2,447
- Reaction score
- 22
- Points
- 381
Share ko lang po Xperia Z2 d6530 pattern at dahil hindi nka DEBUG ang unit kaylangan po ma reset o mprogram yung unit pra matanggal ang pattern
action taken:
wipe on FAst boot no luck
try to update using sony updater pero bumibitaw ang driver kya d madetect
last option ko po Ginawa Flashing using Flashtool
1. Download and install Flashtool on your PC
2. Download the firmware you need (from the list below) and move the .ftf file into the directory C:/Flashtool/firmwares
3. Open Flashtool, click on the lightning symbol ("flash device"), select "Flashmode" and click on "OK"
4. Select the .ftf file of what you downloaded and click on "Flash"
5. Wait for a window to pop up (it may take a few seconds/minutes, just be patient)
6. Now turn off your phone and connect the usb cable to it
7. Push the volume-down button, keep pushing and connect the other end of the usb cable to your PC
8. Once the flashing process has started, you can release the volume button
9. NEVER disconnect the USB cable until it's finished!
10. Turn on and wait for the boot process to complete.




ito nman po ginamit ko na FILE FLASHTOOL FIRMWARE
action taken:
wipe on FAst boot no luck
try to update using sony updater pero bumibitaw ang driver kya d madetect
last option ko po Ginawa Flashing using Flashtool
1. Download and install Flashtool on your PC
2. Download the firmware you need (from the list below) and move the .ftf file into the directory C:/Flashtool/firmwares
3. Open Flashtool, click on the lightning symbol ("flash device"), select "Flashmode" and click on "OK"
4. Select the .ftf file of what you downloaded and click on "Flash"
5. Wait for a window to pop up (it may take a few seconds/minutes, just be patient)
6. Now turn off your phone and connect the usb cable to it
7. Push the volume-down button, keep pushing and connect the other end of the usb cable to your PC
8. Once the flashing process has started, you can release the volume button
9. NEVER disconnect the USB cable until it's finished!
10. Turn on and wait for the boot process to complete.




ito nman po ginamit ko na FILE FLASHTOOL FIRMWARE