REFERENCE Xtron XT7100 tab with board id Flink C706D V2.0 manual virus removal by CM2

ar.vill

Registered
Joined
Jul 28, 2014
Messages
134
Reaction score
4
Points
1
Ito po ang hitsura ng board ng tablet, pasensya na medyo malabo ang pic kasi nasira yong gamit naming pang capture dito sa shop.
screenshot_439.png


Procedure

Open CM2 by infinity box

Under Settings tab, select the correct cpu.
screenshot_441.png


Make a backup first, just to make sure to get back the original firmware in case of boot loop or any worse cases.
screenshot_442.png


After backing-up, go to Extra tab for manual virus removal.
screenshot_443.png

Note:
After pressing scan button another window will pop-up, which unfortunately nakalimutan kong kunan ng screen shot. Subalit pag lalabas na ang scanned window makikita ninyo ang mga applications installed within the system. Kaya't kailangang i manual select ang suspicious applications na may kinalaman sa virus related na app. Ang tanong, papaano malalaman? Simple lang po, kailangang hanapin ang newly installed app na usually within the year of 2015 and 2016. Ang mga apps na created during the previous years other than 2015 and 2016 will almost likely be part of the system files. Wag mabahala sa mga apps the di kasali sa viruses na create within the year of 2016 sapagkat during factory reset sa CM2 ito rin naman ay matatanggal. Bakit pa raw kailangang ifactory reset? ayon kasi sa support group may mga files pa kasing maiiwan na related sa natanggal na viruses during manual removal kaya't need pang i reset oh iformat ang user area ng firmware.

Kabuuang logs:
Card found : S/N : ******** , *****
Chinese Miracle II [MTK module] v 1.48

Operation : Scan APPs [DDirect] [ v1.48 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 11 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1616.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 8801034E4361726420350851403652ED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E4361726420350851403652ED
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID : 0x3E6ACE55A197C8A7EFFA0E8CCF5AEB7B
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

DDirect : Init Ok!
Scanning FileSystem now , please wait
[User Select] : Remove Files and Garbage

[DDCleaner Info] : Files to remove : 66
[DDCleaner Info] : Additional garbage detected : 23
Removing files ...
[DDCleaner] : Removed 66

Special Op #1 : Clear Recovery Data Ok!
Special Op #3 : PostFix Ok!
All Done!


Done!
Elapsed: 00:07:49
Reconnect Power/Cable!


Operation : Format FileSystem [ v1.48 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 11 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1616.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 8801034E4361726420350851403652ED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E4361726420350851403652ED
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID : 0x3E6ACE55A197C8A7EFFA0E8CCF5AEB7B
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:31
Reconnect Power/Cable!

screenshot_437.png


screenshot_438.png


Sana po ay makatulong ng kaunti. :)
 
Last edited by a moderator:
Who read this thread (Total readers: 0)
No registered users viewing this thread.
Back
Top