Y201 unlock done First Time thru bootloader.[Reference]

[AltF4]

Y201 unlock done First Time thru bootloader.[Reference]

akala ko same lang sa ibang qualcom

first attempt

press vol down and power

SigmaKey 1.26.02
4096 Sigma dongle 1.28, Initializing...OK
SigmaKey 1.26.02 Qcom: Direct unlock
Android Sooner Single ADB Interface, Version 0.5, Name: MSM7627A
Initializing...Bootloader is locked. Please unlock it and retry operation.
You can either use SigmaKey or request (FREE) unlock password on Huawei web site.


rto ko na sana


kaya buzz si master scclipsup

next procedure

Unlock Huawei bootloader

1. Select "Qualcomm" platform from the tab menu in the upper left side of the software
2. "Phone model" dropdown box has to be set to "Autodetect"
3. Go to "Service" tab
4. Set the phone to Download mode (procedure is explained in the Download mode manual)
5. Connect your device to PC with USB cable
6. Install required Huawei smartphone driver (only if the phone is connected for the first time)
7. Select DBAdapter Reserved Interface in the ports selection tab
8. Press "Unlock Huawei bootloader" button
9. The message "Done" indicates that procedure was completed successfully
10. Disconnect the handset, remove and reinstall the battery

Download mode

Download Mode

U8667, U8680, U8681, U8730, U8800, U8815, U8816, U8818, U8820, U8825D, U8860, C8860E U8655, U8665, U8666, U8833, U8950, U8950D, U8951, U8951D

1. Switch the device OFF
2. Remove the flash card from the phone
3. Press and hold down Vol -, Vol + buttons simultaneously, then press and hold Power until your phone completely freezes on the pink screen

logs

SigmaKey 1.26.02 Qcom: Direct unlock
DBAdapter Reserved Interface (COM12), Provider: Huawei Incorporated, Driver ver.: 2.0.6.601, Date: 2/3/2010
Version: 76XXU-2030-USNSKQLYM
Detecting flash...eMMC, Flash size: 3.64 Gb
IMEI: 864450010
Bluetooth address: 90F59DEF8B4C
WiFi address: 91F59DEF8B4C
Security area saved to "C:\Documents and Settings\Love\My Documents\SigmaKey\security backup\86445441261_76XXU-2030-USNSKQLYM.skb"
Unlocking phone...Done
Restarting phone...Done