REFERENCE Y53 (PD1628F) Hang on Logo done via CM2QLM

[Papa Blanks]

Issue ay hang on logo then Wipe data please do not perform any operation ng paulit ulit.
Bago ako nag Flash ay check ko muna yung battery at switch pero same problem
No Recovery kaya hindi ma Hard Reset at ma update via sd card/ Error din kapag factory reset,
kaya nag flash na ako.

Procedure
1. Open CM2QLM / Go to Flash
2. Double Click Select / Load Firmware / click rawprogram_unsparse
3. Off Unit the Hold V+ and V- or Test Point (click para sa TP). Test point ginawa ko kasi sira ang volume ng unit

Ito yung Firmware
Ito naman Yung Tools Software Infinity box version 1.16 ginamit ko

Note: Uninstall Qualcomm HS-USB QDloader 9008 driver
Ito yung dapat install na driver
Install EmergencyDownloadDriver
Install Qualcomm Diag
Install WinUsbCoInstaller
Install WinUsbCompatdInstaller
Install UsbDriverExt
See Picture Below kung ano ang lalabas sa Universal Serial Bus Devices

Philippians 4:6
Don’t worry about anything; instead, pray about everything
God Bless to Everyone

 

[raixie]

pwdi bato sa hydra tool

 

[Papa Blanks]

pwdi bato sa hydra tool

pwd po boss dl mo lng firmware tapos sa hydra mo e flash

 

[pampam15]

ano po password ng flash file?

 

[cyclone]

wala po bang password?