z630 frp locked ( nadeads pa ) done parin

[raicent28]

unit/model: acer z630
prob.: frp locked

una reset ko sa nck 1.8.6.8
kaso nag error at ayun namatay
nakakita ako dito ng firmware
kaso may password 2times ko na piniem yung uplaoder
kaso wala reply kahit online naman
so ipinagpabukas ko nalang ..
kaso wala talaga reply si mr.uploader
kaya hanap ako ng iba at pinalad naman makakita

eto po walang pass. yan
4 lang talaga ang may check jan ok lang yon
wag nyo na iload yung iba flash nyo na agad..

http://www.4shared.com/get/Vxxx4GZQce/MT6573__Acer_Z630_T03__by_eric.html

then pagka buhay remove frp naman updated nck
eto po logs ..

Exe version: NCKBox AndroidMTK 1.8.7.0
Selected model: MT6735
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM3)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147326505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A48414732 : 000000000000000000
EMMC UA SIZE: 0x3ab800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac400000 [14.691 GB]
Status: USB_HIGH_SPEED
Not need to swith to high speed port, continue with this settings.
Checking data....wait!

FORMAT EMMC FLASH : BEGIN: 0x6a00000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.

done sa mga uploader po
sana naman po paki monitor yung mga post..
kasi meron talagang need na need na wala talaga reply
di naman po sa kumokontra ako sa pass ng mga files
nakakainis lang minsan na ang tagal mo hinintay e wala pala mapapala

br,
raicent28