REFERENCE Zh&k odyssey ace done cm2

[verser09]

hang sa logo so offerprogram kay costumer nakakita naman ng firmware na sakto..
mahalaga kasi yung kanyang
Project Ver : ZHK_ODYSSEY_ACE_V05_20151221
mayroong di akma kasi so dapat parehas talaga.



READ CODES:


FLASH : eMMC Flash , Structure : Ok!

Reading extended info ...

Model Name : sp7731geaplus_dt_oversea
Model Brand : ODYSSEY_ACE
Model Device: device
AndrVersion : 5.1
BaseBand CPU: SP7731GEA
CompileDate : 12/21/2015 2:15:37 AM
Project Ver : ZHK_ODYSSEY_ACE_V05_20151221
Model Ext : ODYSSEY_ACE

nakakita naman so flash agad after ko mabackup!

PROGRAM:
VOLUME up ang boot key
paki check nyu yung nvm update kasi mag null imei yan after ma flash!
so ayan na! (l:0(l:0

SUCCESS!! ETO YUNG CODES:

Operation : Flash [ v1.27 ]

======= Flash
Files set for flashing :
[ MCU ] : SP7731GEA_device_5.1_ZHK_ODYSSEY_ACE_V05_20151221_ODYSSEY_ACE.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : SC7731_eMMC_DEVICE_5.1_ZHK_ODYSSEY_INFINITY-BOX
File : Infinity_fdl1.bin
File : Infinity_fdl2.bin
File : nvitem_w.bin
File : nvitem_wcn.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : sc7731g_CP0_modem.bin
File : DSP_DM_Gx.bin
File : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
File : logo_480x800.bin
File : fblogo_480x800.bin
File : boot.img
File : system.img
File : cache.img
File : recovery.img
File : userdata.img
File : u-boot.bin

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 16 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!

[FL] : Enabled NVM update. Will program all NVM images found in FW !

PMTManager : Load 0x17 records
PMTManager : PMT Update Ok!
Flashing now

[FlashProc] : NVM Update
Current ID : NV_W
Current Part : wfixnv1
[FlashProc] : Ok!

[FlashProc] : NVM Update
Current ID : NV_WCN
Current Part : wcnfixnv1
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : PRODNV
Current File : prodnv.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : ERASEUBOOT
Current Part : uboot
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : FLASH
Current Part : wruntimenv1
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : FLASH_WCN
Current Part : wcnruntimenv1
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : ERASEMISC
Current Part : misc
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID : SPLLOADER
Current File : u-boot-spl-16k.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : MODEM_W
Current File : sc7731g_CP0_modem.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : DSP_W
Current File : DSP_DM_Gx.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : MODEM_WCN
Current File : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : BOOTLOGO
Current File : logo_480x800.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : FASTBOOT_LOGO
Current File : fblogo_480x800.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : BOOT
Current File : boot.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : SYSTEM
Current File : system.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : CACHE
Current File : cache.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : RECOVERY
Current File : recovery.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : USERDATA
Current File : userdata.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID : UBOOTLOADER
Current File : u-boot.bin
Flashing now ...
[FlashProc] : Ok!


Elapsed: 00:07:51

Reconnect Power/Cable!




AFTER nyan mag encryption sya:
so ako ginawa ko nlng format ko nlng din gamit ko cm2.


Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 16 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount :
Size : 0x00000000811FB000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Done!

Elapsed: 00:00:23

Reconnect Power/Cable!


DONE

ok imei ok camera ok lahat!!

ETO FIRMWARE:
https://mega.nz/#!JAp1GSqL!r_sglIQL2uiTSGWbTYE_lrpCskYTEouwJ54gX2jsbLs


SANA MAKATULONG SA LAHAT
Protected ng password kaya ask me pm or ask the triangle
(l:0(l:0(l:0(l:0
DONT FORGET TO HIT THANKS AND comment kung success sa inyu
salamat

 

[jeff18]

idol meron ka PW?