- Joined
- Jan 30, 2019
- Messages
- 467
Back up FW
file info:
PRELOADER
version: MTK_BLOADER_INFO_v21
name: preloader_keytak6580_weg_l.bin
CPU: MT6752
CUSTOM NAME: CUST
Flash style: EMMC
Flash definitions in preloader: 9
[1]Type: MCP(eMMC+DDR2) CID: 90014A483447326111
[2]Type: MCP(eMMC+DDR2) CID: 45010053454D303447
[3]Type: MCP(eMMC+DDR2) CID: 110100303034474530
[4]Type: MCP(eMMC+DDR2) CID: 1501004E4A325A4D42
[5]Type: MCP(eMMC+DDR2) CID: 700100533130303034
[6]Type: MCP(eMMC+DDR2) CID: 90014A2058494E5948
[7]Type: MCP(eMMC+DDR2) CID: 110100303034473930
[8]Type: MCP(eMMC+DDR2) CID: 90014A483447316404
[9]Type: MCP(eMMC+DDR2) CID: 90014A483447326211
load adress: 0x200d00
PRELOADER END
Android Info
Build ID: LMY47I
Version: 6.0
Build Date: 2017-11-18 11:25:11
Brand: alps
Device: keytak6580_weg_l
Manufacturer: alps
Region: US
Display ID: R9-C_ZHK_ODYSSEY_AEON_20171118
Model: ODYSSEY AEON
Mediatek Version Release: ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P24
Android Info END
NVARAM
IMEI[1] from NVRAM: 359734675713440
IMEI[2] from NVRAM: 359734675784465
NVRAM END
boot info:
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SANDISK 0x53454d303447
EMMC FW VERSION: 28:00:00:00:00:00:00:00
EMMC CID: 45010053454D303447 : 00000000000000
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec600000 [3.693 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM35)
Build ID: LMY47I
Version: 6.0
Build Date: 2017-11-18 11:25:11
Brand: alps
Device: keytak6580_weg_l
Manufacturer: alps
Region: US
Display ID: R9-C_ZHK_ODYSSEY_AEON_20171118
Model: ODYSSEY AEON
Mediatek Version Release: ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P24
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 359734675713440
IMEI[2] from NVRAM: 359734675784465
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing frp ......
Reading: BEGIN: 0x4fa0000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x50a0000 - LEN: 0x2000000
Start processing secro
Reading: BEGIN: 0x9a00000 - LEN: 0x600000
Start processing system
Reading: BEGIN: 0xa800000 - LEN: 0x60000000
Saved to : C:\Users\Viewpoint Paoay\Documents\Android_MTK\firmware_backup\MT6580_EMMC_alps_ODYSSEY AEON_6_0_ALPS_L1_MP6_V2_KEYTAK6580_WEG_L_P24(2019_02_02_11_16)
Wait untill phone will start charging.
All done.
