ZH & K Odyssey Glaze P4 CM2MTK Backup With NVRAM

[khai]

ZH & K Odyssey Glaze P4
CM2MTK Backup With NVRAM​

Card found : S/N : 9674FF51 , v0136
Chinese Miracle II [MTK module] v 1.58

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Device boot not done
Check Drivers
Try again

Boot Error!

Operation Failed
Elapsed: 00:00:30
Reconnect Power/Cable!


Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 21 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 45010044533130313601149548B0C2BF
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , 6101S
[eMMC] : FLASH_CID : 45010044533130313601149548B0C2BF
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
DEV RID : 0xEE22CB436AEFA76BBCD73A8441C396EF
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : ZHNK
ProdName : full_w898_1288_aw_hxgj_zhak
ProdModel : Odyssey_GLAZE
Device : w898_1288_aw_hxgj_zhak
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : ZHNK_Odyssey_GLAZE_P4

[Read Ok] : preloader_w898_1288_aw_hxgj_zhak.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / w898_1288_aw_hxgj_zhak / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2309 MiB
Scatter saved to : C:\Users\RRM Prints\Desktop\ZH & K Odyssey Glaze P4\MT6580__ZHNK__Odyssey_GLAZE__w898_1288_aw_hxgj_zhak__6.0__ZHNK_Odyssey_GLAZE_P4\

All done!

Done!
Elapsed: 00:09:39
Reconnect Power/Cable!


Operation : Read NVRAM [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 21 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 45010044533130313601149548B0C2BF
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , 6101S
[eMMC] : FLASH_CID : 45010044533130313601149548B0C2BF
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
DEV RID : 0xEE22CB436AEFA76BBCD73A8441C396EF
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V57_P3_1_wg_n

NVM Read Ok, MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V57_P3_1_wg_n_eMMC.spnv

Done!
Elapsed: 00:00:25
Reconnect Power/Cable!

​

Glaze P4 Firmware​

Tatsulok para sa Password​

 

[Edzzz11]

Mraming slamt po Smod khai tested po 100%