DOWNLOAD ZTE B816 hang logo done...

[alexeraldojr]

share kolang mga lodi tested po to kaso wla akong pic wla kasing camera phone ko pero 100% tested po yung files sana mak tulong...

• Card found : S/N : AFF51F4E , v0134
• Chinese Miracle II [MTK module] v 1.58
• 
  
• Scatter Load Ok , BaseBand : MT6572 , Project : ztenj72_we_72_kk , Storage : EMMC
• Files found : 11 , Set to Flash : 10
• Created by Infinity-Box (c) Chinese Miracle II (c) 2016
• Device Brand : ZTE
• Device Model : P172R10
• Device CPU : MT6572
• Device IntName : P172R10
• Device Version : 4.4.2
• Device Compile : 6/13/2016 8:23:47 AM
• Device Project : ZTE_B816_M02
• Device ExtInfo : ZTE B816
• Ready to Flash!
• 
  
• Operation : Flash [ v1.58 ]
• 
  
• ======= Flash
• 1. Power Off Phone , Remove battery , Insert back
• 2. Insert USB cable. In some cases require hold BootKey
• 
  
• Wait for phone...
• Phone found! [ 22 ]
• Sync...
• Inital Boot Ok!
• BB_CPU_PID : 6572
• BB_CPU_NME : [MediaTek] MT6572_S00
• BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
• Processing BROM stage
• Settings for BROM configured!
• SecCfgVal : 0x00000000
• BromVer : 0x00FF
• BLVersion : 0x0001
• PreLoader : Active [ Boot with PL ]
• BootLdrSS : NORMAL with PRELOADER
• Processing DA stage
• DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
• Sending and initialize DA ...
• Running DA ver.4.2 on BBID : 0x88
• NAND Flash : NOT INSTALLED
• eMMC Flash : 90014A4834473261110142E5D0C563D3
• Initialize Memory ...
• DRAM already initialized by Preloader
• DAgent sent , init HW now
• eMMC FlashIC initialized
• [eMMC] : FLASH_VEN : 0x90 , OEM : 014A
• [eMMC] : FLASH_INF : [HYNIX] , a2G4
• [eMMC] : FLASH_CID : 90014A4834473261110142E5D0C563D3
• [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
• [eMMC] : FLASH_LEN : 0x00000000E9000000
• [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
• DEV RID : 0xD7A32B5C0591F3B48E2225FEA064D935
• INT RAM : 0x00020000
• EXT RAM : 0x20000000 [512 MiB]
• BOOT TYPE : EMMC_FLASH_BOOT
• SOC VERIFY : C1
• Boot Ok!
• 
  
• ScatCFG : BaseBand : MT6572 , Project : ztenj72_we_72_kk , Storage : EMMC
• Setting : Flash Pre-Erase (Safe) : Enabled
• Setting : AFF verify : Enabled
• Setting : HW verify : Enabled
• 
  
• BL : Check HW compatibility
• BL : BBID supported by BootLoader!
• BL : Check eMMC compatibility
• BL : eMMC supported by BootLoader!
• 
  
• BL : BatteryLevel : 3466 mV
• BL : [WARNING] : BatteryLevel LOW!!!
• 
  
• BL : Flash Pre-Erase
• Total blocks to Erase : 2
• Erase : 0x0000000000C00000-0x0000000000100000
• Erase : 0x0000000002900000-0x00000000E5E00000
• Flash Pre-Erase Done, time used : 00:00:01
• 
  
• SecCfg Passed , 1799
• BMT remark not need. Will skip
• Sending Preloader ...
• Use : preloader_ztenj72_we_72_kk.bin
• Preloader Sent , Init passed
• SecCfg Passed , 1799
• PartCount : 0012
• Update PMT by user request
• Repartition Done!
• Use FLN Mode
• 
  
• Processing : Flash Write
• Flash now : MBR
• Image Flash Ok
• Flash now : EBR1
• Image Flash Ok
• Flash now : UBOOT
• Image Flash Ok
• Flash now : BOOTIMG
• Image Flash Ok
• Flash now : RECOVERY
• Image Flash Ok
• Flash now : SEC_RO
• Image Flash Ok
• Flash now : LOGO
• Image Flash Ok
• Flash now : ANDROID
• Image Flash Ok
• Flash now : CACHE
• Image Flash Ok
• Flash now : USRDATA
• Image Flash Ok
• Flash Write Done, time used : 00:02:29
• 
  
• Processing : Verify
• Verify Passed : MBR
• Verify Passed : EBR1
• Verify Passed : UBOOT
• Verify Passed : BOOTIMG
• Verify Passed : RECOVERY
• Verify Passed : SEC_RO
• Verify Passed : LOGO
• Verify Passed : ANDROID
• Verify Passed : CACHE
• Verify Passed : USRDATA
• Data Verify Done, time used : 00:00:43
• 
  
• Update Mirror PMT
• Update Done!
• 
  
• Update RomInfo done
• 
  
• Done!
• Elapsed: 00:03:52
• Reconnect Power/Cable!

link https://www.4shared.com/get/3AIZ89WKei/ZTE_B816_back_up_junper.html


no password