What's new
By:
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

REFERENCE ZTE Blade Vec Pro - Reprogram Success!! via CM2

CEDETIME

CEDETIME

Registered
Joined
May 18, 2015
Messages
793
Reaction score
45
Points
81
Location
Quezon City
ZTE Blade Vec Pro

History:
Walang Imei
Tapos nag Unfortunate Closed


Actiion Taken:
Patch kay Volcano - Negative
Patch kay MTK droid - Negative
Pasya i-program ko na. . .

Hanap ng flash files
ayun kay Boss Prince ZTE Blade Vec Pro CM2 Backup Here



Procedure:

*Warning! Back-Up first
before you proceed with this procedure
Im not liable to any damaged of your mobile device [-X



Click Setting Tab
Choose SP:Auto . . . . .
Click Extra Tab
Click Erase . . . [Flash Erase] *Warning!
...

After Click Flash Tab
Open Scatter
Locate the firmware
Flash button

Connect the Phone to PC. . . . . . *make sure the CP is Off
Install Drivers.
After install

flashing. . .
Wait for a minute.. . .


Done!



TESTED BY ME

123123123sdsaefxv.jpg


IMAG0071.jpg


IMAG0073.jpg


IMAG0072.jpg


Log
Chinese Miracle II [MTK module] v 1.58

Operation : Flash Erase [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 19 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6592
BB_CPU_NME : [MediaTek] MT6592_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8A
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4838473264040503A1F8B28139
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d2G8
[eMMC] : FLASH_CID : 90014A4838473264040503A1F8B28139
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0xD4D01670A2A98A984E3BA689BC2A9767
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Erase Flash now ...
Keep Preloader alive
Flash erase done

Done!
Elapsed: 00:00:17
Reconnect Power/Cable!


Scatter Load Ok , BaseBand : MT6592 , Project : ztesh92_cwet_kk , Storage : EMMC
Files found : 12 , Set to Flash : 11
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : ZTE
Device Model : P692S20_M92
Device CPU : MT6592
Device IntName : P692S20_ASIA
Device Version : 4.4.2
Device Compile : 10/20/2014 8:19:13 AM
Device Project : GEN_ASIA_P692S20V1.0.0B11
Device ExtInfo : ZTE Blade Vec Pro
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 19 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6592
BB_CPU_NME : [MediaTek] MT6592_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8A
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4838473264040503A1F8B28139
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d2G8
[eMMC] : FLASH_CID : 90014A4838473264040503A1F8B28139
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0xD4D01670A2A98A984E3BA689BC2A9767
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6592 , Project : ztesh92_cwet_kk , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

Switching to HSUSB
HSUSB Init Ok
BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 4290 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000000000-0x0000000000100000
Erase : 0x0000000001D00000-0x00000001CEE00000
Flash Pre-Erase Done, time used : 00:00:04

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_ztesh92_cwet_kk.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : FFFFFFFF
PartErr : Not initialized , will update PMT now ...
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : EBR2
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash Write Done, time used : 00:02:31

Processing : Verify
Verify Passed : MBR
Verify Passed : EBR1
Verify Passed : UBOOT
Verify Passed : BOOTIMG
Verify Passed : RECOVERY
Verify Passed : SEC_RO
Verify Passed : LOGO
Verify Passed : EBR2
Verify Passed : ANDROID
Verify Passed : CACHE
Verify Passed : USRDATA
Data Verify Done, time used : 00:00:51

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:03:48
Reconnect Power/Cable!
Click to expand...


para ibalik imei
mtk droid tool ginamit ko.

THANKS!...
 
Last edited by a moderator:
password

CEDETIME said:
ZTE Blade Vec Pro

History:
Walang Imei
Tapos nag Unfortunate Closed


Actiion Taken:
Patch kay Volcano - Negative
Patch kay MTK droid - Negative
Pasya i-program ko na. . .

Hanap ng flash files
ayun kay Boss Prince ZTE Blade Vec Pro CM2 Backup Here



Procedure:

*Warning! Back-Up first
before you proceed with this procedure
Im not liable to any damaged of your mobile device [-X



Click Setting Tab
Choose SP:Auto . . . . .
Click Extra Tab
Click Erase . . . [Flash Erase] *Warning!
...

After Click Flash Tab
Open Scatter
Locate the firmware
Flash button

Connect the Phone to PC. . . . . . *make sure the CP is Off
Install Drivers.
After install

flashing. . .
Wait for a minute.. . .


Done!



TESTED BY ME

123123123sdsaefxv.jpg


IMAG0071.jpg


IMAG0073.jpg


IMAG0072.jpg


Log



para ibalik imei
mtk droid tool ginamit ko.

THANKS!...
Click to expand...



pa pm ng password thanks
 
Master pm din ako ng Password mayron ako dito nga yon Thanks..
 
yUENWEE

Pa pm po ng password... Saka pa pm na din if still working pa to.. Wala kasi masyado comment na okay xa,, halos lahat humihingi lang ng password
 
Boss Pa Bulong naman ng password hindi nag ppm si boss prince!!! Salamat
 
You must log in or register to reply here.
Back
Top