What's new
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Galaxy J100F Deadboot Solution No Need Jtag Box

Boot Repair Tool Marvell chip Samsung

Supported List

SM-J100F
SM-J100FN
SM-J100M

Symptom

No power up / Not Powering On
Unable to Download mode

Instruction

-Brief Process
1: Install usb Driver for Marvell Chipset.
2: Run "CSDownloader"
3: Load Recover File and Download that file to Device
-to Download Recovery file to device Short-circuit for TP has Required

Pre-requisites

1: usb driver file

Driversfor Marvell.zip
the install file for windows x86/x64 bit are located in that file

2: Pc Program For Recovery

CSDownloader.zip

3: Recovery File

RecoverBoot_SM-J100F_OA3.zip

4: Repair Firmware

Warning...!
I'm not responsible for any damages will be held!
Do at your own Risk!

Looking for Password? use our

"TRIANGLE Button"

We will give it to you for Free...!

Boot Recovery Process

1: install usb driver for "Marvell"
Unzip the " Drivers for Marvell.zip" and Run the install file for each Windows7 versions.
→ For Windows7 32bit : Run "DrvInstaller.exe"
→ For Windows7 64bit : Run "DrvInstaller_x64.exe"

2. Step for recovery
Unzip the "CSDownloader.zip" and Run "CSDownloader.exe"

28sxxf8.jpg


3: Unzip the "RecoverBoot_SM-J100F_OA3.zip"file and
Load "RecoverBoot_SM-J100F_OA3.bin" to CSDownloader.

svh350.jpg


Click "Go" button to start downloading.
Then "Stop" button will be displayed on the tool

4: Short circuit for TP download pin and Ground(GND) by tweezers.

2j3no07.jpg


Connect the phone to PC via USB cable and Attach a battery while short circuit TP and
GND by tweezers.
When CSDownloader detect the device , Recovery binary will be downloaded
automatically.

If the recovery is succeed, progressive bar will be displayed as green color with "Success"word.

Download full SW to the device
Enter download mode, using ‘Volume down’ + ‘Home’ + ‘Power’ key.
If the phone is successfully recovered, phone will enter download mode.
you can now flash your phone using Repair Firmware

;);););)

pa pm ng pass bossing
 
sobra lang laking tulong to sir tatalo unit ko pending na deadboot .. kaso hindi ko din matest at password protected po pala ..
 
nice share bossing
pwede din po ba ito sa na dedboot sa flashing na j100ml
 
sir sana may mkuha din na recovery boot pra sa j500
 
salamat sa info boss.........thanks for sharing and more power.
 
nice sharing boss...salamat dito..laking tulong poh to
 
tanong lang. applicable po kaya ito sa j100ml? salamat
 
Salamat sa useful thread na to... may naka try na ba sainyo ng procedure nato sa J100ML/DS?
 
salamat sir baka pede makahingi na din po ng password nito thanks...
 
sir salamat po baka po pede makahingi na din ng password nito...
 
tanung lang po bakit po kaya walng option para ipasok ang recovery file...?
 
ang bangis mo tlaga boss seya...salamat po sa pag share....
 
Boot Repair Tool Marvell chip Samsung

Supported List

SM-J100F
SM-J100FN
SM-J100M

Symptom

No power up / Not Powering On
Unable to Download mode

Instruction

-Brief Process
1: Install usb Driver for Marvell Chipset.
2: Run "CSDownloader"
3: Load Recover File and Download that file to Device
-to Download Recovery file to device Short-circuit for TP has Required

Pre-requisites

1: usb driver file

Driversfor Marvell.zip
the install file for windows x86/x64 bit are located in that file

2: Pc Program For Recovery

CSDownloader.zip

3: Recovery File

RecoverBoot_SM-J100F_OA3.zip

4: Repair Firmware

Warning...!
I'm not responsible for any damages will be held!
Do at your own Risk!

Looking for Password? use our

"TRIANGLE Button"

We will give it to you for Free...!

Boot Recovery Process

1: install usb driver for "Marvell"
Unzip the " Drivers for Marvell.zip" and Run the install file for each Windows7 versions.
→ For Windows7 32bit : Run "DrvInstaller.exe"
→ For Windows7 64bit : Run "DrvInstaller_x64.exe"

2. Step for recovery
Unzip the "CSDownloader.zip" and Run "CSDownloader.exe"

28sxxf8.jpg


3: Unzip the "RecoverBoot_SM-J100F_OA3.zip"file and
Load "RecoverBoot_SM-J100F_OA3.bin" to CSDownloader.

svh350.jpg


Click "Go" button to start downloading.
Then "Stop" button will be displayed on the tool

4: Short circuit for TP download pin and Ground(GND) by tweezers.

2j3no07.jpg


Connect the phone to PC via USB cable and Attach a battery while short circuit TP and
GND by tweezers.
When CSDownloader detect the device , Recovery binary will be downloaded
automatically.

If the recovery is succeed, progressive bar will be displayed as green color with "Success"word.

Download full SW to the device
Enter download mode, using ‘Volume down’ + ‘Home’ + ‘Power’ key.
If the phone is successfully recovered, phone will enter download mode.
you can now flash your phone using Repair Firmware

;);););)

maraming salamat po dito,keep sharing
 
pwede po ba to sa sm j100ml ? sana gumana sya hehe thank you boss GBU :)
 
Boot Repair Tool Marvell chip Samsung

Supported List

SM-J100F
SM-J100FN
SM-J100M

Symptom

No power up / Not Powering On
Unable to Download mode

Instruction

-Brief Process
1: Install usb Driver for Marvell Chipset.
2: Run "CSDownloader"
3: Load Recover File and Download that file to Device
-to Download Recovery file to device Short-circuit for TP has Required

Pre-requisites

1: usb driver file

Driversfor Marvell.zip
the install file for windows x86/x64 bit are located in that file

2: Pc Program For Recovery

CSDownloader.zip

3: Recovery File

RecoverBoot_SM-J100F_OA3.zip

4: Repair Firmware

Warning...!
I'm not responsible for any damages will be held!
Do at your own Risk!

Looking for Password? use our

"TRIANGLE Button"

We will give it to you for Free...!

Boot Recovery Process

1: install usb driver for "Marvell"
Unzip the " Drivers for Marvell.zip" and Run the install file for each Windows7 versions.
→ For Windows7 32bit : Run "DrvInstaller.exe"
→ For Windows7 64bit : Run "DrvInstaller_x64.exe"

2. Step for recovery
Unzip the "CSDownloader.zip" and Run "CSDownloader.exe"

28sxxf8.jpg


3: Unzip the "RecoverBoot_SM-J100F_OA3.zip"file and
Load "RecoverBoot_SM-J100F_OA3.bin" to CSDownloader.

svh350.jpg


Click "Go" button to start downloading.
Then "Stop" button will be displayed on the tool

4: Short circuit for TP download pin and Ground(GND) by tweezers.

2j3no07.jpg


Connect the phone to PC via USB cable and Attach a battery while short circuit TP and
GND by tweezers.
When CSDownloader detect the device , Recovery binary will be downloaded
automatically.

If the recovery is succeed, progressive bar will be displayed as green color with "Success"word.

Download full SW to the device
Enter download mode, using ‘Volume down’ + ‘Home’ + ‘Power’ key.
If the phone is successfully recovered, phone will enter download mode.
you can now flash your phone using Repair Firmware

;);););)

salamat sa pag bahagi idol...baka ito na ways para ma ok unit ko dito...:):)
 
Masyado ng mahaba ang thread pero wala pa ring feedback kung may naka success na
wag na kayo mahiya post nyo dito kung may naka success na... :-)
 
Still waiting sa naka subok na... baka naman palya parin kaya no feedback until now... tapos may password pa wala naman nagbibigay..
 
May naligaw na sana kaso ngayon ko lang to nabasa.. Better luck next time nalang.
 
Back
Top