WELCOME!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Galaxy J100F Deadboot Solution No Need Jtag Box

Online statistics

Members online
12
Guests online
142
Total visitors
154
Boot Repair Tool Marvell chip Samsung

Supported List

SM-J100F
SM-J100FN
SM-J100M

Symptom

No power up / Not Powering On
Unable to Download mode

Instruction

-Brief Process
1: Install usb Driver for Marvell Chipset.
2: Run "CSDownloader"
3: Load Recover File and Download that file to Device
-to Download Recovery file to device Short-circuit for TP has Required

Pre-requisites

1: usb driver file

Driversfor Marvell.zip
the install file for windows x86/x64 bit are located in that file

2: Pc Program For Recovery

CSDownloader.zip

3: Recovery File

RecoverBoot_SM-J100F_OA3.zip

4: Repair Firmware

Warning...!
I'm not responsible for any damages will be held!
Do at your own Risk!

Looking for Password? use our

"TRIANGLE Button"

We will give it to you for Free...!

Boot Recovery Process

1: install usb driver for "Marvell"
Unzip the " Drivers for Marvell.zip" and Run the install file for each Windows7 versions.
→ For Windows7 32bit : Run "DrvInstaller.exe"
→ For Windows7 64bit : Run "DrvInstaller_x64.exe"

2. Step for recovery
Unzip the "CSDownloader.zip" and Run "CSDownloader.exe"

28sxxf8.jpg


3: Unzip the "RecoverBoot_SM-J100F_OA3.zip"file and
Load "RecoverBoot_SM-J100F_OA3.bin" to CSDownloader.

svh350.jpg


Click "Go" button to start downloading.
Then "Stop" button will be displayed on the tool

4: Short circuit for TP download pin and Ground(GND) by tweezers.

2j3no07.jpg


Connect the phone to PC via USB cable and Attach a battery while short circuit TP and
GND by tweezers.
When CSDownloader detect the device , Recovery binary will be downloaded
automatically.

If the recovery is succeed, progressive bar will be displayed as green color with "Success"word.

Download full SW to the device
Enter download mode, using ‘Volume down’ + ‘Home’ + ‘Power’ key.
If the phone is successfully recovered, phone will enter download mode.
you can now flash your phone using Repair Firmware

;);););)

pa pm ng pass bossing
 
sobra lang laking tulong to sir tatalo unit ko pending na deadboot .. kaso hindi ko din matest at password protected po pala ..
 
Salamat sa useful thread na to... may naka try na ba sainyo ng procedure nato sa J100ML/DS?
 
boss ma try ko nga ito, dami kasi dito, malaking tolong po to sa akin, araming salamat po sa tipsssss.....
 
nice one.salamt sa pagbahagi boss ,,malaking tulong to para sa mga
nagha2nap ng ibang solution...
 
Boot Repair Tool Marvell chip Samsung

Supported List

SM-J100F
SM-J100FN
SM-J100M

Symptom

No power up / Not Powering On
Unable to Download mode

Instruction

-Brief Process
1: Install usb Driver for Marvell Chipset.
2: Run "CSDownloader"
3: Load Recover File and Download that file to Device
-to Download Recovery file to device Short-circuit for TP has Required

Pre-requisites

1: usb driver file

Driversfor Marvell.zip
the install file for windows x86/x64 bit are located in that file

2: Pc Program For Recovery

CSDownloader.zip

3: Recovery File

RecoverBoot_SM-J100F_OA3.zip

4: Repair Firmware

Warning...!
I'm not responsible for any damages will be held!
Do at your own Risk!

Looking for Password? use our

"TRIANGLE Button"

We will give it to you for Free...!

Boot Recovery Process

1: install usb driver for "Marvell"
Unzip the " Drivers for Marvell.zip" and Run the install file for each Windows7 versions.
→ For Windows7 32bit : Run "DrvInstaller.exe"
→ For Windows7 64bit : Run "DrvInstaller_x64.exe"

2. Step for recovery
Unzip the "CSDownloader.zip" and Run "CSDownloader.exe"

28sxxf8.jpg


3: Unzip the "RecoverBoot_SM-J100F_OA3.zip"file and
Load "RecoverBoot_SM-J100F_OA3.bin" to CSDownloader.

svh350.jpg


Click "Go" button to start downloading.
Then "Stop" button will be displayed on the tool

4: Short circuit for TP download pin and Ground(GND) by tweezers.

2j3no07.jpg


Connect the phone to PC via USB cable and Attach a battery while short circuit TP and
GND by tweezers.
When CSDownloader detect the device , Recovery binary will be downloaded
automatically.

If the recovery is succeed, progressive bar will be displayed as green color with "Success"word.

Download full SW to the device
Enter download mode, using ‘Volume down’ + ‘Home’ + ‘Power’ key.
If the phone is successfully recovered, phone will enter download mode.
you can now flash your phone using Repair Firmware

;);););)

maraming salamat po dito,keep sharing
 
Boot Repair Tool Marvell chip Samsung

Supported List

SM-J100F
SM-J100FN
SM-J100M

Symptom

No power up / Not Powering On
Unable to Download mode

Instruction

-Brief Process
1: Install usb Driver for Marvell Chipset.
2: Run "CSDownloader"
3: Load Recover File and Download that file to Device
-to Download Recovery file to device Short-circuit for TP has Required

Pre-requisites

1: usb driver file

Driversfor Marvell.zip
the install file for windows x86/x64 bit are located in that file

2: Pc Program For Recovery

CSDownloader.zip

3: Recovery File

RecoverBoot_SM-J100F_OA3.zip

4: Repair Firmware

Warning...!
I'm not responsible for any damages will be held!
Do at your own Risk!

Looking for Password? use our

"TRIANGLE Button"

We will give it to you for Free...!

Boot Recovery Process

1: install usb driver for "Marvell"
Unzip the " Drivers for Marvell.zip" and Run the install file for each Windows7 versions.
→ For Windows7 32bit : Run "DrvInstaller.exe"
→ For Windows7 64bit : Run "DrvInstaller_x64.exe"

2. Step for recovery
Unzip the "CSDownloader.zip" and Run "CSDownloader.exe"

28sxxf8.jpg


3: Unzip the "RecoverBoot_SM-J100F_OA3.zip"file and
Load "RecoverBoot_SM-J100F_OA3.bin" to CSDownloader.

svh350.jpg


Click "Go" button to start downloading.
Then "Stop" button will be displayed on the tool

4: Short circuit for TP download pin and Ground(GND) by tweezers.

2j3no07.jpg


Connect the phone to PC via USB cable and Attach a battery while short circuit TP and
GND by tweezers.
When CSDownloader detect the device , Recovery binary will be downloaded
automatically.

If the recovery is succeed, progressive bar will be displayed as green color with "Success"word.

Download full SW to the device
Enter download mode, using ‘Volume down’ + ‘Home’ + ‘Power’ key.
If the phone is successfully recovered, phone will enter download mode.
you can now flash your phone using Repair Firmware

;);););)

salamat sa pag bahagi idol...baka ito na ways para ma ok unit ko dito...:):)
 
Masyado ng mahaba ang thread pero wala pa ring feedback kung may naka success na
wag na kayo mahiya post nyo dito kung may naka success na... :-)
 
Still waiting sa naka subok na... baka naman palya parin kaya no feedback until now... tapos may password pa wala naman nagbibigay..
 
gandang thread naman ito napaka useful
salamat sa share smod
napakalaking tulong ito
 
sa dami na nang nag thanks nito pero ni isa wala pa naka post na success. mayron naba? paki post naman jan.
 
pasali sa mga nag hit thanks boss,at salamat kay boss alexan sa mabilis na tugon
 
May naligaw na sana kaso ngayon ko lang to nabasa.. Better luck next time nalang.
 
Sana may mapadaan dito sa akin

para masubokan ko yong guide mo boss

GOD Bless..

antgsm
 
Back
Top