WELCOME!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

REFERENCE Infinix HOT 12i "dm-verity corruption" error Solution

Online statistics

Members online
17
Guests online
1,027
Total visitors
1,044

KalanguyaTech

Premium Account
Joined
Mar 26, 2019
Messages
896
Una hard reset ko muna kung makuha sa HR lang. Pero pagkatapos ng HR waley,same issue.HR reset error.jpg

Kaya proceed na sa Flashing.
Eto nga pala ang ginamit kong Firmware sa pag-flash, walang Password ang file..
https://drive.google.com/u/0/uc?id=1Ekk6MupJ-LjL3LJCrPo8TwN5nAch4r6I&export=download

After download and extract,proceed na sa Flashing.
Steps;
1. Open UT then Go to Mediatek Tab
2. Load the firmware
a. Preloader|EMI = preloader_x665b_h6222.bin
b. Scatter | DUMP File = MT6761_Android_scatter.txt
3.Click Backup NV to backup important data of the phone. Save it to a safe place for restoring later.
4.After Backup complete, click Flash to Begin Flashing.
5.After Flash click Patch DM-Verify. Note, if it says Bootloader Lock error,click PERM|UNLOCK BL.
6.After successful unlocking Bootloader,click Patch DM-Verify again. It should report success.
dm-verify fix.PNG
7.Put check mark on Format All then click Flash again for the second time.
Just click "I Understand" to continue flashing the phone.
8.After Flashing, click RESTORE NV.
9.If the phone bootloop after restoring nv data, do step 5 and 6 again. it should work now.

Pagkatapos ko ma-flash power on ko na ang unit with a smile. Kaso pagka-on ko may orange warning naman.
orange state warning.jpg

So next step ay i-clear ang error gamit ang HxD Editor.
1. Open HxD Editor tapos i-load ang lk.img mula sa folder ng Flash File mo.
2. Click Search then type in Orange State, at mula sa orange state hanggang sa end ng error message e-highlight mo lang then Click Edit then Fill Selection,tapos Fill mo lahat ng zeros para mapalitan lahat ng zero yung naka-highlight.
Edit LK.img_1.PNG
Edit LK.img_2.PNG
Edit LK.img_3.PNG

3. Save mo na yung edited file,then Open mo ulit ang UT. Load mo yung firmware, uncheck mo lahat maliban sa lk.img.
4. Flash mo ulit, dapat yung lk.img lang mai-flash mo.
Flash LK.img Only.png

At eto na,tapos ang problema :)
No more error message sa booting.
no more warning.jpg
done 1.jpg
done info.jpg

Eto nga pala ang TP nito pag mataas din ang Security Patch na tanggap nyo.
Test point.jpg
tp1.jpg
 
Una hard reset ko muna kung makuha sa HR lang. Pero pagkatapos ng HR waley,same issue.View attachment 25062

Kaya proceed na sa Flashing.
Eto nga pala ang ginamit kong Firmware sa pag-flash, walang Password ang file..
https://drive.google.com/u/0/uc?id=1Ekk6MupJ-LjL3LJCrPo8TwN5nAch4r6I&export=download

After download and extract,proceed na sa Flashing.
Steps;
1. Open UT then Go to Mediatek Tab
2. Load the firmware
a. Preloader|EMI = preloader_x665b_h6222.bin
b. Scatter | DUMP File = MT6761_Android_scatter.txt
3.Click Backup NV to backup important data of the phone. Save it to a safe place for restoring later.
4.After Backup complete, click Flash to Begin Flashing.
5.After Flash click Patch DM-Verify. Note, if it says Bootloader Lock error,click PERM|UNLOCK BL.
6.After successful unlocking Bootloader,click Patch DM-Verify again. It should report success.
View attachment 25055
7.Put check mark on Format All then click Flash again for the second time.
Just click "I Understand" to continue flashing the phone.
8.After Flashing, click RESTORE NV.
9.If the phone bootloop after restoring nv data, do step 5 and 6 again. it should work now.

Pagkatapos ko ma-flash power on ko na ang unit with a smile. Kaso pagka-on ko may orange warning naman.
View attachment 25064

So next step ay i-clear ang error gamit ang HxD Editor.
1. Open HxD Editor tapos i-load ang lk.img mula sa folder ng Flash File mo.
2. Click Search then type in Orange State, at mula sa orange state hanggang sa end ng error message e-highlight mo lang then Click Edit then Fill Selection,tapos Fill mo lahat ng zeros para mapalitan lahat ng zero yung naka-highlight.
View attachment 25058
View attachment 25059
View attachment 25060

3. Save mo na yung edited file,then Open mo ulit ang UT. Load mo yung firmware, uncheck mo lahat maliban sa lk.img.
4. Flash mo ulit, dapat yung lk.img lang mai-flash mo.
View attachment 25061

At eto na,tapos ang problema :)
No more error message sa booting.
View attachment 25063
View attachment 25056
View attachment 25057

Eto nga pala ang TP nito pag mataas din ang Security Patch na tanggap nyo.
View attachment 25065
View attachment 25066
na flash ko na ung unit pagkatapos auto restart logo ang nangyari master..my sulotion pa kaya?
 
Back
Top