DONE VIA MAGIC THINNER AND JUMPER WIRE.
- FIRST OPEN THE UNIT , THEN CLEAN AND BLOW DRY...
- CHECK THE UNIT IF ITS BOOTING ... AND VIBRATING...
- IF YES , AND NO SIGN OF DISPLAY THEN CHECK POINT A FOR 3 volts supply...
- IF THERE IS SUPPLY , CHECK POINT A capacitor TO POINT B LINE....
- IF NO CONNECTION ,CHECK PIN 39 TO POINT B IF OK...
- IF OK THEN MAKE JUMPER FROM POINT A TO PIN 39 OF LCD FLEX CONNECTOR ...
- TEST THE UNIT , IF OK CLEAN AND SECURE THE JUMPER WIRE W/ INSULATOR OR TAPE...
- SMILE
...
- BUY COFFEE .
- FIRST OPEN THE UNIT , THEN CLEAN AND BLOW DRY...
- CHECK THE UNIT IF ITS BOOTING ... AND VIBRATING...
- IF YES , AND NO SIGN OF DISPLAY THEN CHECK POINT A FOR 3 volts supply...
- IF THERE IS SUPPLY , CHECK POINT A capacitor TO POINT B LINE....
- IF NO CONNECTION ,CHECK PIN 39 TO POINT B IF OK...
- IF OK THEN MAKE JUMPER FROM POINT A TO PIN 39 OF LCD FLEX CONNECTOR ...
- TEST THE UNIT , IF OK CLEAN AND SECURE THE JUMPER WIRE W/ INSULATOR OR TAPE...
- SMILE
...- BUY COFFEE .
