REFERENCE Nova 3i no backlight , water damage DONE.

[private ryan]

DONE VIA MAGIC THINNER AND JUMPER WIRE.

- FIRST OPEN THE UNIT , THEN CLEAN AND BLOW DRY...

- CHECK THE UNIT IF ITS BOOTING ... AND VIBRATING...

- IF YES , AND NO SIGN OF DISPLAY THEN CHECK POINT A FOR 3 volts supply...

- IF THERE IS SUPPLY , CHECK POINT A capacitor TO POINT B LINE....

- IF NO CONNECTION ,CHECK PIN 39 TO POINT B IF OK...

- IF OK THEN MAKE JUMPER FROM POINT A TO PIN 39 OF LCD FLEX CONNECTOR ...

- TEST THE UNIT , IF OK CLEAN AND SECURE THE JUMPER WIRE W/ INSULATOR OR TAPE...

- SMILE ...

- BUY COFFEE .

 

[oxcart]

meron akong tangap pwede pasalang