OPPO F7 CPH1819
*HANG ON LOGO AFTER CODE/FRP REMOVAL
USE EMMC MEMORY TOOL AND ERASE "CACHE AND USERDATA" ONLY
-IF UNIT STILL BOOTLOOP/HANG TRY HARDRESETTING IT
-AFTER HR AND STILL THE SAME TRY FLASHING USERDATA AND CACHE ONLY WITH MY BACK UP
Code:
Operation : Read Firmware [ v2.00 r4 ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+SEL
BROM : BOOTROM
MODE : Oppo : F7 | Manual : Disabled
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_BR_HIGH.bin
AGENT : Found MT6771
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
EMI : CNT : 000E
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]
EMMC: 90014A484347386134A20825D46AB439
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HCG8a4
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : F7A8A2C2A80125C4574C90652D8FDAA0
DA : USB : HIGH-SPEED
Boot done!
Patch Level : O11019
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-06-05
Product Manfct : OPPO
Build Time : 1529916691
Product Brand : OPPO
Product Model : CPH1819
Product Info : CPH1819
Product Device : CPH1819
Product Name : CPH1819
SW OTA Version : CPH1819EX_11.A.18_0180_201806251612
Display ID : CPH1819EX_11_A.18_180625
Kernel Info : 4.4.95-G201806251612
MT6771__OPPO__CPH1819__8.1.0__CPH1819EX_11_A.18_180625__O11019__CPH1819
Read : preloader.bin
Read : recovery.img
Read : oppo_custom.img
Read : persist.img
ExtSparse : Compression ratio : 92%
Read : proinfo.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : tinysys-sspm.bin
Read : cam_vpu1.img
Read : cam_vpu2.img
Read : cam_vpu3.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : odmdtbo.img
Read : tz.img
Read : odm.img
ExtSparse : Compression ratio : 100%
Read : vendor.img
ExtSparse : Compression ratio : 25%
Read : system.img
ExtSparse : Compression ratio : 5%
Read : cache.img
Read : userdata.img
FW Size : 5.32 GB
Android Info saved : _Android_info.txt
Scatter : MT6771_Android_scatter.txt
Saved to : D:\Oppo\cph1819\MT6771__OPPO__CPH1819__8.1.0__CPH1819EX_11_A.18_180625__O11019__CPH1819\
Done!
Elapsed: 00:06:46*THIS IS MY FULL FRESH CM2 BACK UP AFTER THE UNIT IS A-OK:-bd
CPH1819 CM2 BACK UP
