DOWNLOAD Phonix Mobile Prime 3 firmawre here

[JULAY20]

Phonix Mobile Prime 3​

post ko lang wala ata ta u dito nitong file
tsted po yan la ngalang ss

PHONIX MOBILE PRIME 3 FRIMWARE DOWNLOAD HERE

Password: Jhetrotelecom

my password po ang file TATSULOK mo lang ​

use CM2

Credits to oreg uploader ​

 

[GSMjeremy]

pa pm ako ng password idol..badly needed

 

[EDISON]

ito sa akin kagawa kulang


Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 5 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x000000014D3F7000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:20

Reconnect Power/Cable!


Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 5 ]
Port Opened
Sync...
Initial Boot Failed!

Reconnect Power/Cable!


Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 5 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 5 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 5 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : sp7731c_1h10_32v4_oversea
Model Brand : PHONiX
Model Device: sp7731c_1h10_32v4
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : MRA58K release-keys
Model Ext : PRIME 3

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin

 

[macatbarj]

nice sharing boss julay pa share nrn ng pass nito smt

 

[THEO23]

feedback po sa firmware........

dagdag info po .......

ito po sira ng PHONIX MOBILE PRIME 3 ng tumer.......

<a href="https://ibb.co/cwa57G"><img src="https://preview.ibb.co/jWqu1b/WP_20180108_12_15_01_Pro.jpg" alt="WP 20180108 12 15 01 Pro" border="0" /></a>

lagi po syang installing tapos reboot tapos ganun uli.....
<a href="https://ibb.co/j43Q7G"><img src="https://preview.ibb.co/h8KySG/WP_20180108_11_55_41_Pro.jpg" alt="WP 20180108 11 55 41 Pro" border="0" /></a>

so flash ko sya gamit ang firmware ni TS...

gamit po cm2 spd....

ito po piliin.....
<a href="https://ibb.co/d9Wj1b"><img src="https://preview.ibb.co/fh6HMb/WP_20180108_12_10_37_Pro.jpg" alt="WP 20180108 12 10 37 Pro" border="0" /></a>

flashing....
<a href="https://ibb.co/kVLoSG"><img src="https://preview.ibb.co/nR4F7G/WP_20180108_12_07_30_Pro.jpg" alt="WP 20180108 12 07 30 Pro" border="0" /></a>

after flash po.....
<a href="https://ibb.co/n2mOuw"><img src="https://preview.ibb.co/cFMCnG/WP_20180108_12_12_47_Pro.jpg" alt="WP 20180108 12 12 47 Pro" border="0" /></a>


ok na po sya ang problema NULL IMEI.....
<a href="https://ibb.co/f1n7Mb"><img src="https://preview.ibb.co/dLUbEw/WP_20180108_12_14_31_Pro.jpg" alt="WP 20180108 12 14 31 Pro" border="0" /></a>


kala ko di compatible yung firmware ni TS......

pero try ko flash uli pero check UPDATE NVRAM
<a href="https://ibb.co/dGAGEw"><img src="https://preview.ibb.co/mrQ57G/WP_20180108_13_07_25_Pro.jpg" alt="WP 20180108 13 07 25 Pro" border="0" /></a>


at di nman ako nabigo.....may IMEI na sya at signal.....
<a href="https://ibb.co/eERdSG"><img src="https://preview.ibb.co/bHxUZw/WP_20180108_13_10_16_Pro.jpg" alt="WP 20180108 13 10 16 Pro" border="0" /></a>


kaya maraming salamat sa thread na ito.......

more power po sana makatulong tong share ko.....

ty po TS keep sharing po.....




.

 

[J@me$23â„¢]

thank you cl julay maraming matutulongan nito..