What's new
By:
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

DOWNLOAD Phonix Mobile Prime 3 firmawre here

ito sa akin kagawa kulang


Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 5 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x000000014D3F7000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:20

Reconnect Power/Cable!


Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 5 ]
Port Opened
Sync...
Initial Boot Failed!

Reconnect Power/Cable!


Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 5 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 5 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 5 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : sp7731c_1h10_32v4_oversea
Model Brand : PHONiX
Model Device: sp7731c_1h10_32v4
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : MRA58K release-keys
Model Ext : PRIME 3

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
 
feedback po sa firmware........

dagdag info po .......

ito po sira ng PHONIX MOBILE PRIME 3 ng tumer.......

<a href="https://ibb.co/cwa57G"><img src="https://preview.ibb.co/jWqu1b/WP_20180108_12_15_01_Pro.jpg" alt="WP 20180108 12 15 01 Pro" border="0" /></a>

lagi po syang installing tapos reboot tapos ganun uli.....
<a href="https://ibb.co/j43Q7G"><img src="https://preview.ibb.co/h8KySG/WP_20180108_11_55_41_Pro.jpg" alt="WP 20180108 11 55 41 Pro" border="0" /></a>

so flash ko sya gamit ang firmware ni TS...

gamit po cm2 spd....

ito po piliin.....
<a href="https://ibb.co/d9Wj1b"><img src="https://preview.ibb.co/fh6HMb/WP_20180108_12_10_37_Pro.jpg" alt="WP 20180108 12 10 37 Pro" border="0" /></a>

flashing....
<a href="https://ibb.co/kVLoSG"><img src="https://preview.ibb.co/nR4F7G/WP_20180108_12_07_30_Pro.jpg" alt="WP 20180108 12 07 30 Pro" border="0" /></a>

after flash po.....
<a href="https://ibb.co/n2mOuw"><img src="https://preview.ibb.co/cFMCnG/WP_20180108_12_12_47_Pro.jpg" alt="WP 20180108 12 12 47 Pro" border="0" /></a>


ok na po sya ang problema NULL IMEI.....
<a href="https://ibb.co/f1n7Mb"><img src="https://preview.ibb.co/dLUbEw/WP_20180108_12_14_31_Pro.jpg" alt="WP 20180108 12 14 31 Pro" border="0" /></a>


kala ko di compatible yung firmware ni TS......

pero try ko flash uli pero check UPDATE NVRAM
<a href="https://ibb.co/dGAGEw"><img src="https://preview.ibb.co/mrQ57G/WP_20180108_13_07_25_Pro.jpg" alt="WP 20180108 13 07 25 Pro" border="0" /></a>


at di nman ako nabigo.....may IMEI na sya at signal.....
<a href="https://ibb.co/eERdSG"><img src="https://preview.ibb.co/bHxUZw/WP_20180108_13_10_16_Pro.jpg" alt="WP 20180108 13 10 16 Pro" border="0" /></a>


kaya maraming salamat sa thread na ito.......

more power po sana makatulong tong share ko.....

ty po TS keep sharing po.....




.
 
You must log in or register to reply here.
Back
Top