What's new
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

S6 G925J SCV31 Free Unlock Solution For AU

Seya

Super Moderator
Joined
Jun 12, 2014
Messages
973
Reaction score
119
Points
81
Location
quezon city
First I take no credits for this solution. This solution was found in this forum, with instructions, links to files provided by other generous members who are willing to share, I only want to give a better instructions how to unlock this model.

ok let's start...!!!

Files you need, thanks to vietmobile.vn for sharing:
https://drive.google.com/file/d/0B7MNcHK68wHZUUM1OGVVQTRWYlk/view?pref=2&pli=1
Password:fullscv31

BEFORE DOING ANYTHING, WRITE DOWN THE ORIGINAL IMEI # somewhere. Make sure you know the original IMEI


1). Flash Combination file using Odin. After flashing, phone will be in Factory Binary Mode. Tab one Android logos at the bottom of the screen to get to dial pad and enter *#0808# and select DM+MTP+ADB then OK.


2). Use Z3X, select the SCV31 model and go to Repair tab and press on Reset MSL.


3). Write down the phone's original IMEI# somewhere and save it. Use SPT box and go to Service tab and in Repair IMEI, enter this super IMEI : 358012060753038 (this is an original factory unlocked IMEI) Use C3300 UART cable and write new IMEI to phone. After it finished, check to make sure you have the new IMEI in phone.


4). Flash FULL flash files (BL, AP, CP, CSC) and no need PIT file, using Odin.


5). After flashing full flash files, inset any SIM card, phone boots up and go to WIFI and turn on. Go to Settings>>About>>SIM card status. You should see Status: Not allowed. Tab on "Update SIM card status" at the bottom of the screen then wait until it finished and reboot. Go back to SIM card Status again and see if it shows Status: Allowed. If it is, then you're good to go to the next steps.


6). Repeat Step 1,2, and 3, except in Step 3, enter phone's ORIGINAL IMEI. After all steps done, check to make sure you have original IMEI in phone now.


7). Now flash FULL flash files (BL,AP,CP,CSC) again. After flashing is done, phone should be now UNLOCKED.


If you want to remove AU Japanese contents in ROM, you can flash this SPACX ROM using Odin:


https://www.androidfilehost.com/?fid=24052804347770225


Hope this will help members who need to unlock this model



Credits to original poster :D
 
naka gandang

Reference sir


KEEP IT UP

wa1u9w.jpg
 
may tanggap ako ngayon lang sinabihan ko ung tomer n 50/50
pwedeng mag ok at pwedeng ma deads

pag iisipan dw nya haha
 
gano kaya ka tested? yung saken kase 6.0.1 parang ang hirap isugal baka ma brick :(

tested po boss basta may guts ka lang,at gadgets..lakas ng loob at tyaga..

naka unlock ako nyan last july 30

nakalimutan ko lang ipost..pero napost ko sa FB

and i used this as a reference and guide..many big thanks sa TS
maraming salamat po

 
sir..pwedi pashare din po ng combination ginamit mo error ang nasa z3x..thanks..
 
Back
Top