xiaomi pad 5 no display may sounds ok din current sa charging nag try na din new lcd wala parin display
action taken REBALL CPU. ayun!!! ok na sya may display na same cpu and ram nya sa poco x3 pro.
step 1 hard reset phone if nka passcode menu pa, turn off phone then press hold volume up and power buton pag labas ng vivo bitawan na ang power button then makikita nyo na menu choose recovery mode then ayun makikita nyo na mga option dun specially clear data.
step 2 after nyo ma reset setup...
iphone 7 taptic not workin/unstable charging/auto shutdown
action taken test charging flex connector Diode mode ayun 2pin leak 0.0L value
check resistor kung damage ayun tangal na mga lead kaya ginawa ko re-lead ko para magkaroon ng connection success naman
meron na silang reading sa diode mode...
iphone 7 auto shutdown after 3min , battery health not displaying even after replace new battery and unstable charging current.
action taken test sa power supply para makita kung may leak and meron nga leak 0.026A visual check sa scope habang nka connect power supply
ayun kita agad damage...
step 1. download all needed file here : MediaFire
step 2. open MCT then click bypass authentication then hold vol up and vol down then insert usb.
step 3. after bypass authentication dont remove the usb then proceed to step 4.
step 4. (again dont unplug usb to the phone) open SP flashtool
step 5...
1.optional if nka power on cp at need mag punta sa download mode ganito step.
-plug charger then press volume down and power button hold until the cp is turn into charging status.
-pag nasa charging mode na ang cp then remove mo na ang charger.
-connect cable sa pc then hold volume down and...
share ko lng realme c25s ayaw sa mismong c25s mode ng UTooL
ito tricks
step1 open unlock tool
step2 choose oppo realme c25 ONLY note! kahit c25s unit mo ang piliin mo lng ay c25 lang!!
step3 click BROM erase frp
step4 dapat nka off si realme c25s mo.
step5 hold volume up and volume down sabay...
step 1 open unlock tool go to vivo tab
step 2 search vivo y71 (1724)
step 3 choose EDL erase frp
step 4 turn off phone disassemble back case look for testpoint see pic below
step 5 click start on unlocktool
step 6 link two pin testpoint then plug usb cable then wait till done.
step 7 after done...
No sounds step 1: check speaker use tester ohm mode , good it has continuity
No sounds step 2: use tester diode mode test speaker line on main board , all in good readings.
No sounds step 3: test speaker line on charging board use buzzer mode then check from speaker line to fpc , both line...
1. Test mboard diode mode no issue normal all readings.
2.replace LCD . Ayun ok na LCD pala issue pero pero pero
3.walang budget si tumer kita ko nmn sa kanya na talaga low budget sya for lcd replacement.
4.sabi ko try ko po gawaan ng paraan.
5.baklasin ko LCD then test ko backlight using...
step 1 tester diode mode test vbat line reading 0.001 both line
step 2 saksak sa dc power supply may current agad kahit di pa press power botton reading 0.200A
step 3 kapain kung saan umminit , then naramdaman ko umiinit bandang charging i.c
step 4 baklas i.c cover then use rosin/insenso then on...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.