What's new
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

PREMIUM iPhone 13 Pro Max GREENSCREEN 2nd Procedure

intoy

Site Owner
Staff member
Joined
Jun 12, 2014
Messages
5,112
Reaction score
7,641
Points
541
Location
iLoilo City
PAKIUSAP: HUWAG IKALAT PARA TAYO lang nakakaalam at ma protect pa natin ang negosyo natin
PREMIUM Account lang nakakapasok dito -huwag ipahiram sa iba ang account
pag hindi na tumalab sa 7 & 7 solution posted HERE

itong procedure 2nd ang gawin mo

Tip:
Mag voltage test muna sa tp8 left kung ilan - dapat 0.06v at sa tp9 right side dapat 1.8v
pag iba ang reading gawin mo na ang procedure na ito

Lagyan ng resistor ( para no backjob ang isang dulo ng tp ) ako nilagay ko sa left 8tp ang resistor then nilagyan ko ng manipis na wire papuntang 9tp right

1k ohms resistor
kumuha sa iPhone 6 unit - R0704, R0705, R0706, R0708



greenscreen na hindi na magawa sa iba
1.JPG


2nd row
8tp left connect to 9tp right
may 1k ohms resistor dyan hindi lang makita sa picture para iwas backjob
2024_08_28_12_25_IMG_1964.JPG


Finished product
1724825905842.png
 
sa case ko sir dati ko na cya nagawa sa 7 tp 7 after 2yrs bumalik cya ngayon white screen naman po cya,,then nung ginawa ko tong procedure na to nag green screen naman po cya,,anu yun sir diko na ba dapat tanggalin yung dati kong jumper na 7 tp 7?
 
sa case ko sir dati ko na cya nagawa sa 7 tp 7 after 2yrs bumalik cya ngayon white screen naman po cya,,then nung ginawa ko tong procedure na to nag green screen naman po cya,,anu yun sir diko na ba dapat tanggalin yung dati kong jumper na 7 tp 7?
paki try boss walang resistor at try mo parin 7/7 na gawa mo dati
 
paki try boss walang resistor at try mo parin 7/7 na gawa mo dati
ayaw pa din boss ganun pa din white screen pa din,,pero kapag 8-9 naman w/ resistor nag greenscreen naman cya paps,,then kung 9-10 naman no display...then next ginawa ko 7-7 jumper then 8-9 with resistor pinagsabay ko solid white screen naman nalabas
 
Back
Top